AUTONET TV

A Sticky Brake Situation (Parking Brake Service and Maintenance)

We've all been there.  You park your vehicle on a steeper than usual hill and worry about it rolling down while you're running your errands.  So you decide you'll use the parking brake.  When you get back, you release the parking brake, hit the ignition, put it in gear and—uh, oh—you can feel the parking brake is still on.  It's stuck.  What do you do now?

Welcome to the world of infrequently-used parking brakes.  Yes, they do stick for several reasons. It's common for components to corrode and get locked up.  Sometimes if you have applied it extra hard, it can jam.  Could be a rusty cable, could be a spring that doesn't return the brake to its disengaged position.  Some pieces just break when they're stressed for the first time in a while. A caliper or the pivot arm it's on can also stick.

There are a few things you can try to unstick it.  Carefully rock your vehicle by putting it first in drive and then reverse.  You have to be careful doing that, though, because sometimes you can damage the transmission.  You can try working the parking brake control a few times to see if that will loosen the corrosion.  If you can't unstick it, you can try driving slowly a short distance to a repair facility near you.  Sometimes it won't cause damage to the brakes but it depends on how tightly the parking brake was applied and what was stuck.  You may also have to have your vehicle towed to a repair facility.

In any case, once you've seen these symptoms, have your vehicle brakes looked at by a professional who can fix the root of the problem.  Better yet, don't let your vehicle get in this condition; regular maintenance and inspections by a trained technician should prevent you from getting in a jam somewhere thanks to a stuck parking brake.  You could use a "brake" like that.

Darrell's Firestone
23534 Farmington Rd
Farmington, MI 48336
248-477-9090
http://www.darrellsfirestone.net

Timing is Everything (Timing Belt)

Talk about exquisite choreography; it happens under the hood of your vehicle every time you take a drive.  Your engine’s many complex parts must work exactly together.  One key is a part called a timing belt, which enables the synchronizing of two of your engine’s components, the camshaft, and the crankshaft.  

The timing belt coordinates the valves in your engine to open and close at the appropriate time to get exhaust out of the engine’s cylinders. Timing belts may also power the water pump and the oil pump.  The belt is made of rubber.  Some engines use a timing chain (made of metal). 

Your vehicle’s manufacturer recommends an interval after which you should have your timing belt or chain replaced, and that service should be part of your vehicle’s regular maintenance.  It’s always better to replace it before it breaks rather than after.  After all, if your timing belt breaks while you’re driving down the road, it throws off the whole sync of engine parts and can cause major damage to the type of engines most commonly used in vehicles today.

It's also important to remember that a timing belt is made of rubber, and rubber deteriorates with time, no matter how much use it gets. Have us look at your timing belt to see if it’s time to get it replaced.  

Here are some signs to look for that will let you know if your timing belt is failing. You might have trouble starting your vehicle, it may misfire or black smoke may come out the tailpipe. If you notice any of those symptoms, bring your vehicle in and have us take a look right away.  When it comes to your engine, timing is everything.

Darrell's Firestone
23534 Farmington Rd
Farmington, MI 48336
248-477-9090
http://www.darrellsfirestone.net

Slippery When Wet (Driving on Wet Leaves)

When the leaves fall, you might take a sightseeing trip to see them at peak color.  Or you may simply live in a spot where there are a lot of trees.  When those leaves get wet, you'd be surprised to learn just how slippery they can be. 

We all know ice is slippery to drive on.  What causes tires to slip on ice is a thin layer of water that comes between the road and your tires.  Wet leaves can have the same effect.  The surfaces of leaves are super slick when they're dry, even worse when you add a little moisture.  There's one other thing about leaves.  They are smaller than each tire's footprint, so your tread grips the pavement with uneven traction.

One study showed that your stopping distance can more than double on a surface covered with wet leaves when compared to that same road when it's dry.  Double! That can spell trouble.  So if you find yourself heading into an area with wet leaves on the road, slow down before you get into a jam.  If you do start skidding, use the same driving techniques as you would on ice.  Let off the accelerator, resist jamming on the brakes and steer into the skid.  Again, speed can get you into trouble fast on a slippery surface.

One thing that can help is having tires that are appropriate for the way you drive and the places you travel.  Your service advisor can offer suggestions for tires that are right for you.  Have a technician examine your tread depth and the condition of your tires' rubber.  Sun can break down rubber over time, and age can cause tires to fail, even if their tread seems to be deep enough. 

Your tire is the point of traction between your vehicle and the road.  Uncontrolled skids spell trouble and danger.  Slow down when you see wet leaves on the road.  They can make traction disappear before you know it.

Darrell's Firestone
23534 Farmington Rd
Farmington, MI 48336
248-477-9090
http://www.darrellsfirestone.net

The Sign of the Shield (Heat Shield Repair and Replacement)

Even in the months where temperatures are cooler, heat is still an enemy of your vehicle.  When your engine runs, it creates heat, so there are numerous heat shields that protect other parts from those higher temperatures. Heat shields are installed around several areas of the exhaust system.  Others prevent heat from reaching parts of the vehicle.  Still others prevent heat from reaching the ground (or maybe grass underneath) and starting a fire. 

If you remember your space travel history, you'll know how important a heat shield can be. John Glenn was the first American to orbit the earth, but during that maiden orbital flight, a sensor on board was indicating the heat shield on his capsule, Friendship 7, was loose.  If it had come off, his spacecraft could have burned up upon re-entry.  Fortunately, the heat shield stayed on, and Glenn made history.

Unfortunately, the heat shields on your vehicle don't have warning systems like the space vehicles did.  So you have to maintain them.  Heat shields are constantly exposed to elements like water, salt, sand and dirt.  That makes them prone to rusting and corroding.  Here's one unfortunate fact: Materials that make them good at preventing heat transmission also are soft and vulnerable, often aluminum or special fabric. 

One sign a heat shield will give you that it's loose is noise; you'll sometimes hear it rattling underneath your vehicle when it's running. One way to locate it? Put your vehicle in park, leave the engine running and take a listen outside.  It's usually pretty easy to pinpoint the location.

Make a note of the noise when you are talking with your service advisor. It's important to have those heat shields working correctly so the heat is kept away from your other vehicle systems and combustibles on the ground. The good news is that heat shields can frequently be inexpensively repaired or re-attached.  In other cases, they should be replaced. 

Missing or loose heat shields? Let's just say they're not cool.

Darrell's Firestone
23534 Farmington Rd
Farmington, MI 48336
248-477-9090
http://www.darrellsfirestone.net